Home > Packaging Drop Test Machine >

Heavy Free Fall 1200mm Packaging Drop Tester With 200kg Payload

Product Categories

Vibration Test System [165]
Vibration Testing Machine [127]
Electrodynamic Vibration Shaker [157]
Vibration Table Testing Equipment [120]
Shock Test System [159]
Mechanical Shock Test Equipment [122]
Bump Test Machine [62]
Mechanical Shaker Table [176]
Packaging Drop Test Machine [96]
Lab Drop Tester [77]
Drop Tester Release Hooks [40]
Environmental Test Systems [43]

Labtone Test Equipment Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Heavy Free Fall 1200mm Packaging Drop Tester With 200kg Payload

Ask Lasest Price
Brand Name :	LABTONE
Model Number :	DT020
Certification :	CE, ISO
Price :	negotiable
Payment Terms :	T/T
Supply Ability :	15 Sets / Month
Delivery Time :	45 working days

Add to Cart

Product Details
Company Profile

Heavy Free Fall 1200mm Packaging Drop Tester With 200kg Payload

200kg Payload Drop Tester For Heavy Package

Description

For large packaging with high mass, the vertical drop height during transport will be low and therefore they need drop test with relatively low drop height. Zero Height Drop Tester is mainly used for drop test of big package.

It uses an E-shaped fork that can move downward quickly as a bracket and specimen is placed in balance according to test requirement (surface, edge or Corner drop test). During testing, the bracket moves downwards quickly ahead of specimen with acceleration greater than 3G to ensure the separation of bracket and specimen and achieve free fall. The standard fall distance is ranged between 2.54cm-120cm.

Specifications

Model	DT020	DT030	DT050
Drop Height(mm)	0~1200	0~1200	0~1200
Payload Capacity(kg)	200	300	500
Package Size(mm)	170015001200	190015001200	190015001200
Drop Mode	Free Fall Drop
Machine Size(mm)	210017002800	210017002800	210017002800
Machine Weight(kg)	2350	2500	3200
Power/Air Supply	3-phase AC380V 50Hz (Compressed Air) 0.5~0.7Mpa
Applicable Standards	ISO2248-72(E) GB/T4857.5 JISZ0202-87 IEC68-2-27

FAQ

1. How to you attach the hardware you're testing to your shaker?

By means of a fixture, usually aluminium or magnesium for lightness coupled with rigidity. They can be cast, or smaller fixtures machined from solid stock. Most fixtures are welded.

2. How do you control shakers?

If we're looking for resonances in the product we're testing, we command the shaker to shake the product at one frequency at a time but to vary that test frequency, to sweep it over a range of frequencies. But more realistically, we command the shaker to vibrate randomly and to excite all the resonances simultaneously. Control commands go into the keyboard of a specially programmed computer.

3. What are those resonances? Are they bad?

Have you ever noticed the steering wheel moving with rather a large displacement amplitude, larger than the input to the column? That magnification is called resonance. Possibly it annoys you. There's a slight chance that in a few years that whipping of the steering column might cause bending fatigue failure. When we shake an automotive or ship orland vehicle instrument, we're looking for, for example, portions of printed wiring boards (PWBs) responding with greater motion than we're inputting. That flexing may damage PWB wiring, it may damage the attached components and the PWB.

Service

Pre-Sales Service

Technical consultation: test method, laboratory planning and suggestion.
Equipment selection: selection scheme, FAQ.
Product testing scheme.
Customer communication and progress report.

In-sales

Customer communication and progress report.
Guidance for pre-installation preparation, equipment commissioning and test run.
Calibration (when third party's verification is required).

After-Sales Service

Technical training: operation of equipment, daily maintenance, common fault diagnosis and troubleshooting.
Scheduled on-site service: Detection of problem as soon as possible in order to eliminate equipment and anthropogenic hazards. This is to ensure long term and stable equipment operation as well as delivery of latest technical information.
Technical support: special paid services are provided according to customer’s needs.

Product

Heavy Free Fall 1200mm Packaging Drop Tester With 200kg Payload

Product Tags:


*From:	Your email address is incorrect!
*To:	Labtone Test Equipment Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!