Medium - Force Shaker Vibration Instruments for Electronic Assembly
Tests
Applicable Standards: MIL-STD, DIN, ISO, ASTM, IEC, ISTA, GB, GJB, JIS, BS etc.
Applicable Industries: Automotive, Electronics, Aviation, Vessel, Telecommunication,
Military Industry, Measuring Instrument etc.
Features:
The air-cooled series electro-dynamic vibration shaker has the
advantages, such as wide frequency range, excellent indicators,
high reliability, small foor space, easy to move, and easy to
operate. At present, this series has a variety of models of
vibration generators to choose. The exciting force range is from
3kN to kN and maximum load is from 110kg to 1000kg. Also, the
climate and mechanics environmental testing equipments are
provided.
Working Principle:
Specifications: EV103-EV220
| Model | EV103 | EV203 | EV106 | EV206 | EV210 | EV220 |
| Vibration Generator | VG300/25 | VG300/40 | VG600/25 | VG300/50 | VG1000/50 | VG2000/50 |
| Frequency(Hz) | 2-4000 | 2-2500 | 2-3000 | 2-3000 | 2-3000 | 2-2500 |
| Max Exiting Force(kg.f) | 300 | 300 | 600 | 600 | 1000 | 2000 |
| Max. Displacement (mmp-p) | 25 | 38 | 25 | 50 | 50 | 50 |
| Max. Acceleration(g) | 100 | 100 | 100 | 100 | 100 | 100 |
| Max. Velocity(cm/s) | 200 | 120 | 180 | 200 | 200 | 200 |
| Payload(kg) | 110 | 120 | 200 | 200 | 300 | 400 |
| Armature Mass(kg) | 3 | 3 | 6 | 6 | 10 | 20 |
| Armature Diameter(mm) | φ150 | φ150 | φ200 | φ200 | φ240 | φ320 |
| Cooling Method | Forced Air Cooling |
| Vibration Generator Weight(kg) | 460 | 460 | 720 | 920 | 1100 | 1600 |
| Vibration Generator Dimension L*W*H(MM) | 750*560*670 | 750*555*670 | 800*600*710 | 800*600*710 | 845*685*840 | 1200*870*1100 |
| Power Amplifier | Amp3k | Amp3k | Amp6k | Amp6k | Amp12k | Amp22k |
| Cooling Method | Forced Air Cooling |
| Power Amplifier Weight(kg) | 250 | 250 | 320 | 320 | 350 | 500 |
| Power Amplifier Dimension L*W*H(MM) | 800*550*1250 | 800*550*1250 | 800*550*1250 | 800*550*1250 | 800*550*1520 | 800*550*1520 |
Utility
Requirements | 3-phase AC380V ±10% 50Hz |
| Aggregate Capacity(KW) | 8 | 9 | 18 | 20 | 25 | 35 |
Customer Services
Presales:
a.Technical consultation: test method, laboratory planning and
suggestion.
b. Equipment selection: selection scheme, FAQ.
c. Product testing scheme.
In-Sales:
a. Customer communication and progress report.
b. Guidance for pre-installation preparation, equipment
commissioning and test run.
c. Calibration (when Third Party’s verification is required).
After-Sales:
a. Technical training: operation of equipment, daily maintenance,
common fault diagnosis and
troubleshooting.
b. Scheduled on-site service: Detection of problem as soon as
possible in order to eliminate equipment
and anthropogenic hazards. This is to ensure long term and stable
equipment operation as well as
delivery of latest technical information.
c. Technical support: special paid services are provided according
to customer’s needs.
Detalied Pictures:
