JEDEC JESD22-B100B Mechanical Shock Test Equipment for Half sine
1500g,0.5ms
Introduction
LABTONE provides shock testing equipment ranging in both size and
performance capability. To help guide interested customers, we’ve
put together a list of key considerations that help select the most
appropriate shock test system
JEDEC-20 is the best Shock Machine to make sure the product,
smartphones, tablets, computers and other mobiles, can withstand
shock. Apply high acceleration to computer parts, Batteries,
smartphones, tablets, laptops, cellular phones, and mobile products
for product fragility tests.
| Main parameters of the shock tester |
| Operating platform | 200 × 200 mm |
| Max. load | 10KG |
| Peak acceleration | 20 to 3500G (customization acceptable) |
| Pulse duration | 0.3~18ms (customization acceptable) |
| Equipment dimensions | 660×700×2380mm |
| Equipment weight | 850 kg |
| Power & Air Supply | 220VAC±10％ 60Hz,2kVA 0.5Mpa—0.7Mpa |
Standard Shock Test Systems
| Model | SKT30 | SKT50 | SKT100 | SKT200 | SKT300 | SKT600 | SKT1000 | |
| Table Size (cm) | 40 x 40 | 50 x 60 | 70 x 80 | 100 x 100 | 120 x 120 | 150 x 150 | 200 x 200 | |
| Max. Specimen Weight(kg) | 30 | 50 | 100 | 200 | 300 | 600 | 1000 | |
Max. Acceleration (G) | Half Sine | 600 | 600 | 600 | 500 | 500 | 300 | 300 | |
| Saw-tooth | 100 | 100 | 100 | 100 | 100 | 100 | 100 | |
| Square | | 150 | 150 | 150 | 100 | 100 | 100 | |
Pulse duration (ms) | Half Sine | 30—0.5 | 30～1 | 30～1 | 30～2 | 20～3 | 20～3 | 20～3 | |
| Saw-tooth | 18～6 | 18～6 | 18～6 | 18～6 | 18～6 | 16～6 | 18～6 | |
| Square | | 30～6 | 30～6 | 30～6 | 30～6 | 30～6 | 30～6 | |
| Controller cabinet dimension(cm) | W55*D50*H80 |
| Machine weight(Kg) | 1900 | 2300 | 3200 | 4200 | 8500 | 15500 | 21500 | |
| Power supply | 3(phase) AC380V 50/60Hz Compressed air 0.5～0.8MPa |
| Standards | GB/T2423-2008 GJB1217 GJB360.23 GJB150 GJB548 MIL-STD-202F
IEC-68-2-27 MIL-STD-883E MIL-STD-810F ISTA UL |
Purpose of Shock Testing
· The purpose of shock testing is to determine the fragility of
products.
· Ruggedness is a desirable product characteristic.
· A certain amount of ruggedness is necessary for the product's
proper functioning.
· Manual handling during distribution normally will "exceed"
product ruggedness so protective packaging is usually required
· Shock testing can be useful to improve the ruggedness of designs
and add value to the product
· Traditional shock fragility testing used SRS techniques because
we lacked knowledge of what inputs were likely.
· SRS was well established in architecture and the building
industry.
Shock Testing: End Results
· Highly reliable and more robust product
· Identify and correct design deficiencies
· Facilitate worldwide shipment and delivery of a high-quality
product
· Better able to meet customer demands and Warranty Claims
Reduce costs and create profit!!
Customer Services
Presales:
- Technical consultation: test method, laboratory planning, and
suggestion.
- Equipment selection: selection scheme, FAQ.
- Product testing scheme.
In-Sales:
- Customer communication and progress report.
- Guidance for pre-installation preparation, equipment commissioning
and test run.
- Calibration (when Third Party’s verification is required).
After-Sales:
- Technical training: operation of equipment, daily maintenance,
common fault diagnosis, and troubleshooting.
- Scheduled on-site service: Detection of the problem as soon as
possible in order to eliminate equipment and anthropogenic hazards.
This is to ensure long term and stable equipment operation as well
as delivery of the latest technical information.
- Technical support: special paid services are provided according to
the customer’s needs.
Workshop :
