Vibration and Shock Testing Equipment Meet ASTM D999 and ASTM D4728
600kg.f
Vibration Test System -Technical Specifica...
Vibration Test Systems
Vibration test is a process of exciting or shocking some part or
device to observe its reaction in real environment. Vibration test
is widely applied in many fields, ranging from circuit board,
airplane, ship, rocket, missile, automobile, household appliance
and other industrial products.
Labtone can offer you the whole vibration and testing proposal, and
provide you with the quality certificates of products according to
national and international standards, including GB, GJB, UL, JIS,
DIN, ISO, BS, MIL, IEC and ASTM standards.
Specifications: EV203-EV220
| Model | EV203 | EV206 | EV210 | EV220 |
| Vibration Generator | VG300/40 | VG300/50 | VG1000/50 | VG2000/50 |
| Frequency Range (Hz) | 1-2500 | 1-3000 | 1-3000 | 1-3000 |
Max Exiting Force (kg.f) | 300 | 600 | 1000 | 2000 |
Max. Displacement (mmp-p) | 38 | 50.8 | 50.8 | 50.8 |
| Max. Acceleration(g) | 100 | 100 | 100 | 100 |
| Max. Velocity(cm/s) | 120 | 200 | 200 | 200 |
| Payload(kg) | 120 | 200 | 200 | 300 |
| Armature Mass(kg) | 3 | 6 | 10 | 20 |
| Armature Diameter(mm) | φ150 | φ200 | φ240 | φ320 |
| Cooling Method | Forced Air Cooling |
| Vibration Generator Weight(kg) | 460 | 920 | 1100 | 1600 |
| Vibration Generator Dimension L*W*H(MM) | 750*555*670 | 800*600*710 | 845*685*840 | 1200*870*1100 |
| Power Amplifier | Amp3k | Amp6k | Amp12k | Amp22k |
| Cooling Method | Forced Air Cooling |
| Power Amplifier Weight(kg) | 250 | 320 | 350 | 500 |
| Power Amplifier Dimension L*W*H(MM) | 800*550*1250 | 800*550*1250 | 800*550*1520 | 800*550*1520 |
Utility
Requirements | 3-phase AC380V ±10% 50Hz |
| Aggregate Capacity(KW) | 9 | 20 | 25 | 35
|
Features:
- Strength of the suspension system and linear motion guiding, strong
carrying capacity, good guiding functions, high stability.
- Perfect performance on amplitude variation.
- High efficient on D Class power conversion, 3 - Sigma peak current,
provide the optimization of power consumption and minimum harmonic
distortion.
- Rapid self-test diagnostics and chain safeguard, high high safety
and reliability
- Air gasbag isolation damping device realize the the vibration table
with no need for special foundation. Perfect reappearance vibration
waveform and the reduction of vibration transmission
- Different application on the vertical and horizontal tables.
- Simple operation for the controller.
Introduction to digital vibration controller
The vibration controller is of advanced distribution structure
system, and closed-loop control is achieved by DSP processor. PC is
independent of control loop to ensure real-time and high efficiency
of the control system so as to timely and rapidly respond to any
changes of the test system, and ensure control stability and high
precision. 32-bit floating-point DSP processor with primary
frequency up to 300MHz and 24-bit resolution ADC/DAC are used for
hardware in coordination with high precision floating-point digital
filtering and low noise design technology of hardware circuit. The
dynamic random control range of the controller is more than 90dB
and the signal to noise ratio is more than 100dB.
Service commitment and support:
